| EM1000 BASIC-programmable Ethernet Module
Third-generation Tibbo Ethernet module built exclusively for running applications written in Tibbo BASIC. Features:
- Compact dimensions (38.4x28.4x5.5mm).
- 50 MIPS purpose-built CPU.
- One 100BaseT Ethernet port.
- x4 high-speed TTL serial ports.
- 512/1024K onboard flash disk.
- Real-time clock with backup power.
- SPI port for future extensions.
- x49 general-purpose I/O lines.
For more information on the EM1000 click this link |
|
| |
|
EM1000-TEV
The EM1000-TEV development system has been designed to aid you in developing data terminals, data collection devices, and control equipment based on the EM1000 embedded module.
For more information on the EM1000-TEV click this link
|
|
| |
|
WA1000
The WA1000 is a Wi-Fi module for use with the EM1000 BASIC-programmable embedded module.
The WA1000 piggy-backs on top of the EM1000 and communicates with the latter via a high-speed SPI interface. The module features an integrated chip antenna. Additional external antenna can also be connected for better range.
For more information on the WA1000 click this link
|
 |
| |
|
DS1000
Featuring four RS232 ports, the new DS1000 is the first member of Tibbo's new DS10xx family of BASIC-programmable Industrial Controllers.
For more information on the DS1000 click this link
|
|
| |
|
EM1202
The EM1202 is a third-generation Tibbo Ethernet module built exclusively for use with TAIKO -- Tibbo's rapid programming solution that includes Tibbo BASIC language, Tibbo IDE software, and TiOS operating system.
For more information on the EM1202 click this link
|
 |
|
|
EM202-EV
Ethernet-to-serial Board
The
EM202-EV is a 100BaseT Ethernet-to-serial Board based
on the EM202 Ethernet Module. The board offers a
convenient way to test the EM202 and is also small
enough to be used in production devices as a faster
implementation alternative to Modules.
The
EM202-EV is supplied in three versions that differ
in the set of installed components. The Board can
be used to create a standalone Device Server or it
can be built into your serial device.
Click
here for a datasheet
|
|
| |
|
EM202
Ethernet Module (Embedded Device Server)
The
EM202 is Tibbo's new 100BaseT Ethernet-to-serial
Module in RJ45 form factor. Very compact and
highly integrated, the Module features built-in Ethernet
magnetics, RJ45 connector, and even four status LEDs!
While
being a true one-component Ethernet-to-serial solution,
the EM202 has a board footprint just slightly bigger
than that of a regular RJ45 connector.
Click
here for a datasheet
|
|
| |
|
EM200
Ethernet Module (Embedded Device Server)
The
EM200 is Tibbo's new 100BaseT Ethernet-to-serial
Module for onboard installation. Offering the
smallest size and lowest profile of all Tibbo Modules,
the EM200 is an ideal choice for space-constrained
applications. To achieve its small dimensions, the
Module doesn't have Ethernet magnetics onboard.
Click
here for a datasheet
|
|
| |
|
EM120
Ethernet Module (Embedded Device Server)
The
EM120 is Tibbo's new 10BaseT Ethernet-to-serial
Module for onboard installation. Pin-to-pin compatible
with, but slightly bigger than the EM200 100BaseT
Module, the EM120 offers an advantage of significantly
lower power consumption. To achieve smaller dimensions,
the Module doesn't have Ethernet magnetics onboard.
Click
here for a datasheet |
|
| |
|
EM100
Ethernet Module (Embedded Device Server)
The
EM100 is Tibbo's original 10BaseT Ethernet-to-serial
Module for onboard installation. The EM100 is
highly integrated and requires only one external
component- RJ45 Ethernet connector. The EM100 has
the lowest power consumption of all Ethernet Modules
offered by Tibbo. Economical pricing makes the Module
an ideal choice for low-cost applications.
Click
here for a datasheet |
 |
| |
|
DS202 Serial Device Server
The DS202R is the newest member of Tibbo Serial Device Server family. The DS202 offers full backward compatibility with the original DS100 Serial Device Server. Notable enhancements include 100BaseT Ethernet port, large routing buffers, additional programming modes, wide supply voltage range and significantly smaller external dimensions.
The DS202 is internally based on the EM202-EV Ethernet-to-Serial Board (and EM202 Module).
Click here for a datasheet |
|
| |
|
DS100 Serial Device Server
The DS100 is a first-generation Tibbo Serial Device Server that externally connects any existing serial device to an Ethernet (TCP/IP) network. The DS100 features a compact and stylish design and is supplied in two versions: DS100R with RS232 serial port and DS100B with universal RS232/422/485 serial port (available through a single DB9M connector, interface selection by DIP switch).
Click here for a datasheet |
|
|
|
